Xerox DocuPrint 4635 Operator'S Manual Download Page 156

Page: 156 / 344

OFFLINE PRINTING TASKS

Unload a 1/2 inch cartridge

During normal operation:

Automatic procedure

1. The tape drive automatically rewinds and unloads the

cartridge when a job is finished.

2. The cartridge is ejected from the transport.

Manual procedure 18 track

To unload the 18 track cartridge manually, follow this procedure:

1. Press the Unload button twice.

Figure 7-30.

Unload button

•

The message display shows the tape drive condition while
the rewind and unload operation is in progress.

•

An asterisk appears in the message display when the cartridge
is unloaded.

•

The cartridge is ejected from the transport.

Manual procedure 18/36 track

To unload the 18/36 track cartridge manually, follow this
procedure:

1. Press the Ready button to take the drive offline and then

press the Unload button.

Figure 7-31.

Ready and Unload buttons

•

The message display shows the tape drive condition while
the rewind and unload operation is in progress.

•

The cartridge is ejected from the transport.

7-18

XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE

Summary of Contents for DocuPrint 4635

























































































































































































































































































































































Search results

Summary of Contents for DocuPrint 4635

Reviews:

Related manuals for DocuPrint 4635

Brands by name

Popular brands

Xerox DocuPrint 4635, Operator'S Manual

Search results

Summary of Contents for DocuPrint 4635

Reviews:

Related manuals for DocuPrint 4635

Brands by name

Popular brands