OFFLINE PRINTING TASKS
Load a 1/4 inch cartridge tape
Press the Release button. The door opens partially.
2. Manually open the door completely. Insert the cartridge into
the feed slot with the label facing to the left.
3. Close the door. The tape is automatically loaded and
positioned at BOT.
The LED indicator is green when the tape is operating properly.
If the indicator is flashing red, call for service.
Figure 7-40.
Inserting a cartridge
Unload a 1/4 inch cartridge tape
1. Use the Rewind Tape task to rewind the tape. (Refer to the
“Rewind/unload tape” section of this chapter.)
2. Press the Release button to open the door. Lower the door
manually.
3. Carefully remove the cartridge.
4. Close the door to prevent dust accumulation.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
7-25