MAINTENANCE TASKS
Adding fuser agent
WARNING: Fuser agent contains silicone, which can cause
irritation upon contact with the eyes. Be sure to wash your
hands with soap and water after you finish this procedure.
Follow this procedure to add fuser agent:
1. Open the right and left doors of the printer and locate the
fuser area.
Figure 11-9.
Locating the fuser area
2. Place a drop cloth on the floor under the fuser area.
3. Grasp the green handle on the fuser drawer and pull it out
until it stops.
Figure 11-10. Opening the fuser drawer
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
11-7
