HIP PRINTING TASKS
HIP printing tasks through command line
You can perform HIP printing tasks by entering commands either:
•
Through the Messages window of the PC UI
•
Through the system controller terminal (non-U.S. markets
only).
To enter commands through the Messages window of the PC UI:
1. Place the cursor in the window.
2. Click once with the left mouse button.
3. Enter the command.
If you are using the system controller terminal, just use the
keyboard to enter the command.
HIP printing tasks
The following sections contain instructions for performing
specific HIP printing tasks.
Enter HIP communication mode
Use this task to enter HIP communication mode.
Note: This task is not necessary if you are using the PC UI
windows.
Enter HIP Communication Mode task
through command line
Enter the following command:
HIP [option[,option[,...]]]
HIP options are provided in this chapter in the task sections;
however, for a complete list and explanation of all available HIP
options, refer to the 4635 LPS Operations Reference.
Notes:
•
If your LPS has only one host and it is set up as the default
host in HIP.LIB, or if only one host is set up in HIP.Lib,
entering HIP has the same effect as entering HIP HOST, HIP
ONLINE, and HIP START.
•
If your LPS has more than one host, then the one which is
set up as the default host in the HIP.Lib becomes active
when you enter the HIP command. If you want to use
another host, you must specify the host name.
•
The first time you enter HIP after performing a system
generation, you must specify a host name. This host is saved
in the recovery file of the system disk. If you do not enter a
host name, the following message appears:
HP2010 NO HOST SELECTED
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
8-3
