JOB CONTROL TASKS
•
To display the current image darkness value, enter the
following command:
DARKNESS
Lead edge screen
Use this task to apply a screen to the leading margin of a printed
sheet. The screen lightens a high density image in the margin.
The edge lightening change is applied to:
•
The next print job
•
The current print job if printing was interrupted.
Note: For MICR users, turn off MICR mode when adjusting the
EDGE settings.
If you select this task while the LPS is printing, the following
confirmation window appears on the PC UI.
Figure 5-7.
Confirmation window (“Lead Edge Screen”
option)
•
Select Yes to continue with the Lead Edge Screen task.
•
Select No to cancel the task.
If you have the system controller terminal rather than the PC UI,
the following messages appears on the screen:
OS1331 LEAD EDGE SCREEN SETTING IS [OFF, NORMAL, STRESS]
OS0500 OUTPUT STOPPED
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
5-9
