STATUS AND PRINT TASKS
Bin Full Criteria and Setting Bin Limits
task through command line
•
To set the maximum numbers of reams for the bin, enter the
following command:
BINFULL [threshold, boundary]
threshold
The maximum number of reams for the bin.
This number must be between 0 and 5.
Note: If the threshold is 0, the boundary must
be specified.
boundary
The separation boundary for the bin. The
options are:
•
NONE. There is no separation boundary.
•
SET. The stacking switches after each
printed set.
•
REPORT. The stacking switches after each
printed report.
•
JOB. The stacking switches after each
printed job.
•
To specify the maximum number of sheets for the bin,
enter the following command:
BLIMIT bin letter,sheet count
bin letter
The bin whose limit you are setting. For
example, enter A to set the limit for
stacker bin A.
sheet count
The number of sheets that can be sent to
the bin. The number must be between 100
and 2500.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
9-27
