SYSTEM OVERVIEW OF THE 4635 LASER PRINTING SYSTEM
Feeder trays
The feeder trays hold and convey paper and other materials (for
example, transparencies) used to produce printed output.
Figure 1-6.
4635 feeder trays
1. Two processor feeder trays are located in the main part of
the printer.
•
The main tray (tray 1) holds 1100 sheets of 20 pound/75
gsm paper
•
The auxiliary tray (tray 2) holds 600 sheets of 20
pound/75 gsm paper.
•
If configured, trays 1 and 2 can handle paper sized from
7 by 10 inches/178 by 254 mm to 9.05 by 14.02
inches/230 by 356 mm.
2. There is one high-capacity feeder (HCF) tray in each of the
feeder/stacker modules (trays 3, 4, 5 and 6). The HCF trays
are the primary paper supply for the printer. If configured,
each tray can handle paper sized from 7 by 10 inches/178 by
254 mm to 14.33 by 17 inches/364 by 432 mm.
Note: In order to print on paper sized 7 by 10 inches/178 by
254 mm, you must have the 7 X 10 enablement kit. Refer to the
section “Optional printer components“ later in this chapter for
more information.
The input and output page numbers vary for each HCF tray
as shown in table 1-1.
Table 1-1. Input and output page numbers for each
HCF tray
Configuration
Input
(pages)
Output
(pages)
First F/S
4000
2500
Second F/S
6500
5000
Third F/S
9000
7500
Fourth F/S
11,500
10,000
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
1-5
