JOB CONTROL TASKS
D
Print the samples on both sides of each sheet
of paper (duplex mode). If you do not enter a
D, the samples print on only one side of each
sheet of paper (simplex mode).
copies
The number of copies you want. If you do not
enter a number, one copy is printed.
Stop input/output
Use this task to stop input processing, output processing
(printing), or both.
•
To stop both input and output processing, you may also
press the <STOP> key on the keyboard.
•
To stop printing, you may also press the Stop button on the
printer control console.
•
You can open the I/O window, which gives you stop
input/output options, by pressing both the left and right
buttons of the mouse at the same time.
Figure 5-12.
I/O window
Note: When running an online job, stopping output processing
will also stop input processing. When doing the same for an
offline job, the input processing continues.
Stop Input/Output task through
windows
•
To stop both input processing and printing, select “Stop
Input/Output” from the Job Control menu.
•
To stop input processing, select “Stop Input” from the Job
Control menu.
•
To stop printing, select “Stop Output” from the Job Control
menu.
Stop Input/Output task through
command line
•
To stop both input processing and printing, enter the
following command:
STOP
•
To stop input processing, enter the following command:
STOP I
5-16
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
