SYSTEM CONTROL TASKS
System control tasks
The following sections contain instructions for performing
specific system control tasks.
Power on the LPS
Use this task to start the LPS.
1. Press the Local button on the operator control panel, unless
otherwise instructed.
Figure 4-2.
Local button on operator control panel
2. Press the System Power On button on the operator control
panel.
Figure 4-3.
System Power On button on operator control
panel
The Power indicator lights.
•
If you have the PC UI, the desktop appears.
•
If you have the system controller/keyboard display,
READY $ appears on the display.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
4-3