FILE CONTROL TASKS
e. Enter the blocking factor.
Note: This option appears only when you are
copying from system disk to tape. It is the number
of disk blocks packed into one tape block.
f.
Enter the name to be given to the new file in the
Output File ID field.
— The format is file-name.file-type.
Note: The file name can be up to six characters
in length and can consist of letters or numbers.
Punctuation characters (such as a comma) or
spaces cannot be used in the name.
— If you do not enter a name in this field, the new
file name is the same as the input file name.
g. If you are copying files from tape to disk, select the
Review check box to display a confirmation window
when a file of the same name already exists on the
system disk.
Figure 10-6.
Confirmation window (Review option)
From the window, you can:
— Select Yes to write over the file on the system disk
— Select No to skip to the next file in the Copy task.
— Select End Review to end the copy review request. A
confirmation window no longer appears if a file of
the same name already exists on the system disk.
h. Select the Next header button if you want the next
file on the tape or disk to be displayed in the Input
File ID field.
i.
Select the Find header button to search for a specific
file.
— The Find window opens.
10-6
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
