![background image](http://html2.mh-extra.com/html/xerox/docuprint-4635/docuprint-4635_operators-manual_4072836090.webp)
SYSTEM CONTROL TASKS
Figure 4-6.
Boot button on the operator control panel
2. Select the option you want to use from the following:
•
Operating System. Select this option to boot the LPS
from the system disk.
•
System Disk. Select this option to access TEM. You can
then perform various system tasks, including SYSGEN.
•
Reel to Reel. Select this option to boot the LPS from the
open-reel tape drive. This option switches you to TEM.
•
QIC. Select this option to boot the LPS from the 1/4 inch
cartridge tape drive. This option switches you to TEM.
•
18 Track Tape. Select this option to boot the LPS from
the 1/2 inch cartridge tape drive. This option switches
you to TEM.
3. The full desktop appears after the system boot is completed.
Boot the LPS task through system
controller terminal
(non-U.S. markets only)
To boot the LPS from the system controller terminal, follow this
procedure:
1. Press <B> for BOOT on the keyboard to load the operating
system software (OSS).
Note: The operating system software must be loaded before
the system can finish the warm-up cycle.
When loading is complete, the following messages appear on
the system controller display:
LOADING PROGRAM.......
XEROX [PRODUCT ID]
LASER PRINTING SYSTEM
VERSION X REVISION Y
DISK ID: [Thirty-character-ID-record]
ENTER DATE:MM:DD:YY
2. Key in the date, using numerals. You may use a space, a
colon (:), or a slash (/) between the month, day, and year.
Once you have entered the date, a written version is
displayed, that is, 1/23/95 becomes January 23, 1995.
4-6
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE