JOB CONTROL TASKS
Sample
Use this task to print a single page sample of the current job
being printed.
•
The job may be running or suspended.
•
The job must be at least three pages in length for you to be
able to sample it.
•
The next available page is printed twice and the extra page is
sent to the sample tray.
To get a sample, you may also:
•
Press the <SAMPLE> key on the keyboard.
•
Press the Sample button on the printer control console.
•
Open the I/O window, which gives you the sample option,
by chording the mouse—that is, pressing both the left and
right buttons of the mouse at the same time. (Refer to figure
5-12.)
Note: A print job must be in output processing in order to
obtain a sample print. Also, you may not print samples when the
sample tray is the output destination for a job, for example,
when printing transparencies or when ordered stock is being
used in the job.
Sample task through windows
Select “Sample” from the Job Control menu.
Sample task through command line
To print a sample of the current print job, enter the following
command:
SAMPLE
5-18
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
