PAPER FACTS
Table 3-3.
Trays 3, 4, 5 and 6 (or high capacity trays)
performance guide**
Paper
Superior performance
Good performance
Performance limits and
suggested alternatives
Size range***
8 by 10 to 11.69 by 17
inches/203 by 254 to 297 by
432 mm. Includes:
•
11 by 14 inches
•
11 by 17 inches
•
B4 (250 by 353 mm)
•
A3 (297 by 420 mm)
Smaller or larger sizes
cannot be used.
Weight range
20 to 110 pounds/75 to 200
gsm
16 to 20 pounds/60 to 75
gsm****
Weights outside the limits
shown are not
recommended.
Capacity
Tray 3: 2600 sheets, 20
pound/75 gsm paper
Tray 4: 2600 sheets, 20
pound/75 gsm paper
For greater capacity, use the
Autoswitch feature.
Type or
condition
•
Xerographic paper in
good condition
•
Predrilled stock
(fanned thoroughly)
•
Slightly curled paper*
•
Manual two-sided
(duplex prints)
•
High speed label stock
•
Excessively curled
paper*
•
Curl direction should be
determined before
loading paper into tray.*
•
DO NOT use mylar
reinforced paper in trays
3, 4, 5 or 6. Hardware
damage may result. Use
trays 1 or 2.
*
Curl direction should be determined before loading
paper into trays. Refer to the “Paper jams and paper
curl” section of chapter 12, “Problem solving tasks,” for
additional information.
**
Refer to the Paper stocks guide for additional
information.
***
Optional 7 X 10 enablement kit allows 7 by 10 inches/178
by 254 mm paper size.
****
Make sure that heavy weight paper levers (located in
areas 2 and 4 of the printer) are in the appropriate
position for the weight of paper being used. Refer to
the “Prints are skewed“ section of the “Problem solving
tasks“ chapter.
3-4
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
