manualshive.com logo in svg

Xante ScreenWriter 3, Manual

Share
Download
Xante ScreenWriter 3 Manual Download Page 85

_____________________________________

 Macintosh Setup  3-49

Note:

To print a list of resident fonts in ROM, use Adobe
Downloader’s File: Download PostScript File option to
download the FONT.PS3 file (or download the
Fontsamp.ps3 file to see a sample of these fonts).

Fig. 3.27  Font Directory Window

3.

Select the font storage area from the Device menu to view the
fonts present in that area.

4.

Remove a font from printer memory or a hard disk by
highlighting the font and clicking Delete.

5.

Click OK. The Font Directory window closes and the Adobe
Downloader main menu appears.

6.

Select File: Quit to close the Adobe Downloader.

Note:

To remove fonts downloaded to printer memory, turn the
printer off. Fonts are stored in printer memory only during
the current power cycle.

◊◊◊

Summary of Contents for ScreenWriter 3

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands