Xante ScreenWriter 3, Manual

Page: 273 / 288

_____________________________________ Troubleshooting 11-19
• In the media source (either a paper cassette or the multipurpose
feeder) and the toner cartridge (A)
• In the back of the paper feeder (B)
• Around the toner cartridge (C)
• In the paper exit area under the fuser cover (D)
Use the following procedure to locate a media jam; then see
“Clearing Jams” for details on removing the jam.
1. Check for media jams in the paper cassette or multipurpose
feeder from which the media was fed.
2. Check for media jams in the paper exit area under the fuser
cover.
3. Check for media jams around the toner cartridge.
4. Check for media jams in the back of the paper feeder from
which the media was fed.
5. Reassemble the printer.
Clearing Jams
This section describes removing media jams from specific locations.
Warning: Remove jams slowly and carefully to prevent tearing
the media. Media scraps in the printer can become a
fire hazard.