Xante ScreenWriter 3, Manual

Page: 50 / 288

3-14 Macintosh Setup bb ____________________________________
The plug-in’s user guide (less than 10 page SimpleText file) describes
system requirements and plug-in installation. To print this guide,
double-click WM UserGuide; then, select File: Print.
Configuring the PPD
1. Select Chooser from the Apple menu. The Chooser window
appears (fig. 3.4).
2. Select AdobePS or PSPrinter from the box on the left (top left
in a network environment); a list of available printers appears
to the right.
Note: If the printer does not appear in the list, verify that
—the printer is on and cable connections are secure
—LocalTalk or EtherTalk (depending on your setup)
is enabled on the printer front panel
—the correct protocol (AppleTalk or EtherTalk) is
selected on the front panel
—your Macintosh is setup for LocalTalk or EtherTalk
in the AppleTalk Control panel.
Fig. 3.4 AdobePS Chooser Window