Xante ScreenWriter 3, Manual

Page: 74 / 288

3-38 Macintosh Setup bb ____________________________________
Resetting Custom Curve Defaults
To reset a custom gamma curve to the factory default (a copy of the
standard Gamma 0 curve) or to reset all gamma curves to the factory
defaults
1. Highlight the curve to change in Update Gamma Curve list in
the Linearization window and click Reset (fig. 3.15). The
Reset Curves window appears (fig. 3.18).
Fig. 3.18 Reset Curves Window
2. Choose Reset Custom Gamma X to factory setting (the X will be
replaced by the number of the curve you highlighted in step 1) or
choose Reset all to factory settings. Then, select Negative Film if
the final printed output will be a negative print.
3. Click Ok. After the curve or curves are reset, the Linearization
window reappears.
4. Click Ok. The Linearization window closes. Then, select File:
Quit to close Command Center.
Accurate Calibration Technology (X-ACT)
Use XANTÉ’s patented X-ACT feature to calibrate your printer in
two ways, through the front panel MISC: XACT menu or through
XANTÉ Command Center’s More X-ACT menu.