manualshive.com logo in svg

Xante ScreenWriter 3, Manual

Share
Download
Xante ScreenWriter 3 Manual Download Page 147

_______________________________________

 Ethernet Setup 5-9

Now that the Novell server is configured for NetWare 3.X and 4.X,
skip to “Configure the Print Server Emulation” later in this chapter.

Configure the Novell Server (NetWare 5.X)

Use XANTÉ Command Center to setup the Novell print server
name, the file server name of the Novell server and the Printer
AppleTalk name if it is different. (See “Selecting the Novell Names”
earlier in this chapter for details.) Also use Command Center to
enable login and printing.

To configure the Novell server for NetWare 5.X

1.

Login to the Novell server as the administrator or equivalent.

2.

Run NWAdmin. A NetWare Administrator window similar to
the following appears (fig. 5.3).

Fig. 5.3  NetWare Administrator Window

Summary of Contents for ScreenWriter 3

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands