Xante ScreenWriter 3, Manual

Page: 186 / 288

6-14 Configuration bb ______________________________________
Because of manufacturing variations and usage, a printer may not
print lines with the exact dimensions specified by the application.
X-ACT allows you to calibrate your printer to compensate for these
differences. See “Procedures” in chapter 3 (Macintosh) or 4 (PC) for
instructions.
Accurate Screens
To maximize processing resources, your printer calculates the line
screen from lpi and angle settings similar, but not necessarily
identical, to the settings specified in your application. The Accurate
Screens feature allows you to override this approximation and use
the exact settings specified in your application to calculate the line
screen. When this feature is enabled, there may be an increase in
processing time because of additional demand on printer resources.
Set Accurate Screens from your application Print dialog box.
• False, the factory default, disables Accurate Screens and uses the
printer’s standard line screen calculation.
• True allows the printer to build the line screen based on specific
lpi and angle settings in your application.
Note: Accurate Screens is active in the PPD only if the Enhanced
Screens menu is set to None.
Clean (Transfer Roller Cleaning)
Use the MISC:CLEAN menu to have the printer perform an
approximately 25 second cleaning of the transfer roller. Make sure
READY/IDLE
displays before selecting START from the Clean
menu.
CLEANING
displays during the cleaning cycle; at the end of
the cycle, a blank page prints. When
READY/IDLE
reappears, the
cleaning process is complete and the printer is ready to accept a new
job.