Xante ScreenWriter 3, Manual

Page: 101 / 288

___________________________________________ PC Setup 4-15
Fig. 4.8 PostScript Printer Driver Setup Window
2. Select Yes or No in the Install Setup Program window; then
click Next.
If you select Yes, go to step 3. If you select No, skip to step 4
after the driver files load.
3. Click Next to copy the AdobePS printer driver files and setup
program to the default directory on your PC. Then, click Next.
The Printer Type window appears.
Note: If an Existing Files On Local Disk window appears,
click Next to install the files again or Skip to not
reinstall the files.
4. Select how your printer is attached to your host in the Printer
Type window (fig. 4.9).
If your printer is connected to your PC through the serial or
parallel port or if you are using Windows NT 4.0, select Local
Printer, click Next, and skip to step 7.
If your printer is connected to a network other than Windows
NT 4.0, select Network Printer, click Next, and go to step 5.