Xante ScreenWriter 3, Manual

Page: 179 / 288

_______________________________________ Configuration 6-7
Level 2 Reset
Level 2 resets printer options to factory default settings except for
printer margins, gamma settings, Novell network print server
parameters, IP network parameters, and More X-ACT settings.
To do a level 2 reset, turn off the printer, hold down the Online and Tray
Select keys. Release the keys after
RESET 2
appears in the window.
Menu Structure
Configuration menus allow you to configure many printer feature
defaults and the printer interfaces. The two main configuration menu
groups are the Miscellaneous (MISC) menus and the Interface (I/F)
menus (fig. 6.2). Use Miscellaneous menus to set printer feature
defaults. Use Interface menus to set printer RS232, parallel,
LocalTalk, and (optional) Ethernet interface defaults.
READY/IDLE
SETUP:MISC SETUP: I/F
I/F:IP ADDRESS
I/F:RS232
I/F:PARALLEL
I/F:LTALK
I/F:ETALK*
I/F:LPR*
I/F:NETBEUI*
I/F:NVL PSRV*
TEST MENU
MISC:DOT GAIN
MISC:DPI
MISC:FONT ACCEL*
MISC:IDIOMREC
MISC:INITIAL JOB
MISC:JAM RECOVER
MISC:LANG
MISC:LPI
MISC:MAN FEED
MISC:MEDIA
MISC:PAPER MODE
MISC:POWER SAVE
MISC:RAM DISK
MISC:SOFTERROR
MISC:STRTUP PAGE
MISC:TIMEOUT
MISC:TONER PAGE
MISC:TRAY SWITCH
MISC:XACT
MISC:CLEAN
ENTER
ENTER
*
Only with IDE drive
and RAM Disk enabled
* Optional
MENU
Fig. 6.2 Main Menus