manualshive.com logo in svg

Xante ScreenWriter 3, Manual

Share
Download
Xante ScreenWriter 3 Manual Download Page 48

3-12  Macintosh Setup

bb

____________________________________

4.

Drag the PPD to the System Folder: Extensions: Printer
Descriptions folder on your Macintosh.

The AdobePS printer driver and your printer’s PPD are installed.
Skip to “Configuring the PPD” later in this chapter to complete the
driver setup.

PSPrinter 8.3.1

The PSPrinter installation program loads PSPrinter 8.3.1, Chooser
version 7.3 (if necessary), the PSPrinter Read Me, and the latest
PPDs. It overwrites any earlier PSPrinter version but will not
overwrite other printer drivers.

Installing PSPrinter 8.3.1 and the PPD

1.

Insert the XANTÉ Utilities CD-ROM into your Macintosh.

2.

Double-click the XANTÉ Utilities 4.X icon.

3.

Go to the Printer Drivers: PSPrinter 8.3.1: US English (or
appropriate language) folder and double-click the PSPrinter
Install icon.

4.

Click OK in the Adobe Printer Driver entry window. The
PSPrinter Installation window appears.

Fig. 3.3  PSPrinter Installation Window

Summary of Contents for ScreenWriter 3

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands