Xante ScreenWriter 3, Manual

Page: 185 / 288

_______________________________________ Configuration 6-13
On a Macintosh, use the Chooser’s Auto Setup feature to set installable
options to agree with the printer’s configuration. To change PPD menu
defaults, use the Print dialog box Save Settings button. See “Selecting
PPD Options (Macintosh),” earlier in this chapter.
On a PC, PPD menu defaults and installable options are set during
PPD configuration. See “Configuring the PPD for Windows 95, 98,
or NT 4.)” in chapter 4 for details.
The following features can be configured from the Print dialog box.
Accurate Screens Resolution
Fast Imaging Save Spooled Job
Gamma Smooth Shading
Horizontal and Vertical Image Control Temperature
Mirror Print Tray Switch
§
Enhanced Screens
§
PC Menu only
Note: Some applications require additional configuration to access
certain features. See your application documentation and the
appendix, “Application Notes and Page Design.”
Configuring Printer Features
Printer interface and features are set using front panel keys and
menus, PPD options in your application Print dialog box, and
XANTÉ Command Center. This section describes available printer
features and their configuration.
Accurate Calibration Technology (X-ACT)
X-ACT (XANTÉ’s patented Accurate Calibration Technology)
allows you to calibrate your printer in two ways. You can calibrate
printer line lengths using the front panel MISC:XACT menu. You
also can use XANTÉ Command Center’s More X-ACT menu to
calibrate line lengths as well as correct inaccuracies in printing
width, height, skew, and angle.