manualshive.com logo in svg

Xante ScreenWriter 3, Manual

Share
Download
Xante ScreenWriter 3 Manual Download Page 175

_______________________________________

 Configuration  6-3

Introduction

This chapter describes configuring printer features. Included are
manual settings available through the front panel and advanced
features available through the PPD options and XANTÉ Command
Center.

Note:

PPD options override printer default settings for a specific
job or for all jobs sent to the printer from your host.

Front Panel

The printer’s front panel provides printer status information and
allows you to configure some printer features (fig. 6.1).

ONLINE

RESET

FORM

FEED

TEST

TRAY

SELECT

MENU

DUPLEX

ENTER

ONLINE/

READY

DATA

MANUAL

DUPLEX

™

™

®

®

Fig. 6.1  Printer Front Panel

Window

The printer’s front panel window displays configuration menu
options and messages that indicate printer status, request operator
help, and relay error or service information (fig. 6.1).

Summary of Contents for ScreenWriter 3

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands