manualshive.com logo in svg

Xante ScreenWriter 3, Manual

Share
Download
Xante ScreenWriter 3 Manual Download Page 12

2-4  Installation

bb

_________________________________________

Printer Package

Unpack the printer, saving the packing materials.

1.

Remove the items packed on top of the printer.

Warning!

The printer weighs approximately 58.5 lbs (26.5 kg)
without the toner, cassettes, and media installed.
• Always have two people lift the printer.
• Only lift the printer using the recessed grip areas on
     the right and left sides.

2.

Remove the shipping stabilizer on top of the printer; then, lift
the printer out of the box (fig. 2.2).

Fig. 2.2  Lifting the Printer

3.

Remove the plastic wrap, tape, and shipping stabilizers from
all of the items.

Your printer package contains the following items:

•

Your XANTÉ printer

•

500 sheet cassette

•

Power cord

•

ScreenWriter 3 user’s guide (this manual)

Summary of Contents for ScreenWriter 3

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands