manualshive.com logo in svg

Xante ScreenWriter 3, Manual

Share
Download
Xante ScreenWriter 3 Manual Download Page 259

_____________________________________

Troubleshooting  11-5

PAPER OUT

There is no media in the selected cassette
or feeder, the selected cassette or feeder is
not installed properly, or tray chaining is
selected and all trays do not contain the
same size media.

PROCESSING

The printer is processing a job to print.

READY/FONT ACCEL

Font Accelerator is updating the RAM
disk at runtime with the most recently
used fonts.

READY/IDLE

The printer is on line and ready to
accept a print job.

READY/PRINTING

The printer is completing a print job and
ready to accept a new job to begin
processing.

RESET 1

The printer has reset to factory default
settings and the On Line and Tray Select
keys can be released safely.

RESETTING JOB

The printer is resetting after the Reset
key has been pressed and an active job
has been cancelled.

ScreenWriter 3

Appears when the printer is first turned
on, before initialization begins.

TEST PRINT

The printer is printing a test page.

WAITING

The printer is processing a job and
waiting to receive more data before
printing.

WARMING UP

The printer is warming up.

Summary of Contents for ScreenWriter 3

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands