Xante ScreenWriter 3, Manual

Page: 199 / 288

_______________________________________ Configuration 6-27
Set Smooth Shading from your application Print dialog box. Off, the
factory default, disables this feature. Options of Maximum, High,
Medium, Low control the degree to which Smooth Shading is
implemented.
Soft Error
Soft Error alerts you that the printer requires attention. Examples are
low toner and low paper messages.
Set Soft Error using the front panel MISC:SOFTERROR
configuration menu. Yes, the factory default, enables this feature; No
disables it.
Note: While soft error messages are helpful, occasionally some
software misinterprets the messages. If this occurs with a
particular software application, try disabling this feature.
Spooler
If your printer has an optional hard drive, you can use the spooler to
place up to 250 print jobs into a queue on that drive. The spooler
reduces return to application time for a print job by freeing the
communications channel between the computer and the printer.
Save Spooled Job allows you to retain print jobs in the spooler’s
queue indefinitely. These jobs can be reprinted from the queue,
eliminating the time required to process the file and send it to the
printer.
When a job is sent over a spooled interface, it is not processed
immediately. It is assigned a job ID and added to the end of the
spooler’s job queue on the printer’s hard drive. Jobs can be spooled
to the hard drive while the printer is performing normal PostScript
processing.
When the printer is in the READY/IDLE state (no jobs are being
processed currently), jobs are processed from the spooler’s job queue
in the order they were received.