Xante ScreenWriter 3, Manual

Page: 40 / 288

3-4 Macintosh Setup bb ____________________________________
The PostScript 3 Fonts folder contains an installation program and
screen fonts used on XANTÉ’s PostScript 3 printers for display on
Macintosh systems.
Note: Do not overload the Macintosh OS Fonts folder. On
Macintosh operating systems prior to 8.0, you have to
remove some of these fonts; Font folders on these systems
can contain no more than 128 fonts.
The Printer Descriptions folder contains XANTÉ printer PPD
(PostScript Printer Description) files which provide software
applications access to printer specific features.
The Printer Drivers folder contains Adobe PostScript drivers and
their installation programs for Roman font printers. See “XInstaller”
and “Adobe PostScript Printer Drivers” later in this chapter and the
Readme.PDF on the CD-ROM to load these drivers.
The Product Manuals folder contains PDF files of some XANTÉ
printer manuals. Use Adobe Acrobat Reader 3.0 to view and print these
manuals.
Read1st.txt describes Adobe Acrobat Reader 3.0 installation.
Readme.PDF summarizes the XANTÉ Utilities (Macintosh). Open this
file using Acrobat Reader 3.0.
The Screen Fonts folder contains fonts used by XANTÉ’s PostScript
Level 2 printers for display on Macintosh screens. If you do not have
these fonts, copy them into the System: Fonts folder on your Macintosh.
The XANTÉ Utilities folder contains XANTÉ Command Center,
Adobe Downloader, a Downloader readme file, and the XD-1
(densitometer) software. See “XInstaller,” “XANTÉ Command Center,”
“Adobe Downloader,” and “Calibration with a Densitometer (Gamma)”
later in this chapter to load and use these files.
XInstaller is an installation program for XANTÉ Command Center,
Adobe Downloader, your printer’s PostScript PPDs, the appropriate
PDF (Printer Description File) for QuarkXPress (if it is installed on your
system), and the XD-1 software. See “XInstaller” later in this chapter.
Always check the CD-ROM Readme files before using the printer.