Xante ScreenWriter 3, Manual

Page: 246 / 288

10-10 Options bb __________________________________________
Installing SIMM and Firmware Upgrades
SODIMMs are used for RAM upgrades. Resolution upgrades are
firmware (flash ROM) changes.
RAM Upgrades (SODIMMs)
Standard RAM configuration is 16 MB for the ScreenWriter 3. Your
printer features interleaved DRAM for faster processing and better
buffering capabilities.
RAM can be upgraded with 16 and 64 MB SODIMMs installed in
the DRAM banks (fig. 10.7). SODIMMs must be installed in pairs. If
you use both 16 MB and 64 MB SODIMMs, the pair of 64 MB
SODIMMs must be installed in the DRAM banks labeled 0 (0/0 and
0/1). The following list shows valid DRAM SODIMM installations
for your printer.
Bank 0/0 16 MB 16 MB 16 MB 64 MB 64 MB 64 MB
Bank 0/1 16 MB 16 MB 64 MB 64 MB 64 MB
Bank 1/0 16 MB 16 MB 64 MB
Bank 1/1 16 MB 16 MB 64 MB
Total 16 MB 32 MB 64 MB 128 MB 160 MB 256 MB
The following are SODIMM specifications for you printer.
Note: If you purchase SODIMMs from a vendor other than
XANTÉ, you should test the RAM before purchasing
large quantities. XANTÉ tests show some vendor’s
RAM, manufactured to specifications, is incompatible
with our printers. XANTÉ cannot guarantee the
performance of RAM sold by other vendors.