Xante ScreenWriter 3, Manual

Page: 189 / 288

_______________________________________ Configuration 6-17
• Optimized for Speed implements a greater degree of data
compression to provide the fastest print time but with the
possibility of a noticeable loss of data quality.
Note: Optimize selections do not function if the print job contains
an image that is masked or rotated to anything other than 0
°
,
90
°
, 180
°
, or 270
°
.
Font Accelerator
Font Accelerator allows you to set aside a portion of RAM disk to
store fonts for quick system access. Font Accelerator automatically
loads the most recently used fonts from the printer’s optional hard
disk into the RAM disk. This eliminates time usually required to
access fonts from the hard disk. The Font Accelerator menu is active
only if fonts are downloaded to an optional hard disk on the printer
and RAM disk is enabled for 1 MB or more.
Set Font Accelerator from the MISC:FONT ACCEL configuration
menu. Options indicate the percentage of RAM disk that the Font
Accelerator can use. The factory default is 100%.
Horizontal and Vertical Image Control
Horizontal and vertical image control allows you to adjust image
placement on media horizontally and vertically regardless of
limitations set by your application.
Set the Horizontal and Vertical menus from your application Print
dialog box. None, the factory default, makes no adjustment to the
image position on the media. The other options are in .25" (6 mm)
increments up to 3.00" (76 mm).
Idiom Recognition
Idiom Recognition allows you to use newer, more efficient
PostScript 3 commands in place of older PostScript commands for
the same action. This feature recognizes the older commands and
substitutes the newer more efficient ones for processing.