manualshive.com logo in svg

Xante ScreenWriter 3, Manual

Share
Download
Xante ScreenWriter 3 Manual Download Page 61

_____________________________________

 Macintosh Setup  3-25

CRD Directories

This menu is not for use with monochrome laser printers.

Linearization

This menu allows you to create and download custom curves to your
printer. These curves can be selected for a specific job from the Print
dialog box or set as the default from the printer’s front panel. See
“Calibration with a Densitometer (Gamma)” later in this chapter.

Adobe Downloader

Use Adobe Downloader to load and manage font files on your
printer’s hard drive and to send PostScript files to your printer.

Fig. 3.10  Adobe Downloader Menu

File Menu

The File menu allows you to download fonts and PostScript files to
the printer and to quit Adobe Downloader.

Summary of Contents for ScreenWriter 3

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands