Xante ScreenWriter 3, Manual

Page: 221 / 288

_______________________ Printing with Various Media Types 8-5
Printing Envelopes
Use the multipurpose feeder or envelope cassette, following the
procedures in chapter 2, the media specifications in chapter 7, and
these guidelines when printing envelopes.
• Do not use gummed envelopes or envelopes with adhesive tape.
• Before loading the envelope, place it on a flat surface and press it
smooth to make the corners and folds as flat as possible.
• Feed envelopes print side up, short edge first.
• Load envelopes flap open in the multipurpose feeder to provide
the best print quality in the address area. Load them flap closed
in the envelope cassette.
• Format envelopes in your application and run a plain paper test
print to check flap alignment before running on more expensive
envelope stock.
• Use the Cool fuser temperature setting when printing envelopes.
Printing Labels
Always use the multipurpose feeder, following the procedure in
chapter 2, the media specifications in chapter 7, and these guidelines
when printing labels.
• Do not overload the label stock. Label sheets compressed by the
weight of the stack will expand as they feed into the printer
which can cause a jam.
• Make sure labels are not curled on the corners or coming loose
from the backing sheet.
• Use only labels that are rated as “laser safe.” Do not use label
sheets with exposed adhesives (such as partially used sheets or
sheets on which the adhesive has seeped through to the surface).
• Use the Cool fuser temperature setting when printing labels.