manualshive.com logo in svg

Xante ScreenWriter 3, Manual

Share
Download
Xante ScreenWriter 3 Manual Download Page 113

___________________________________________

 PC Setup  4-27

Startpg.on enables the start-up page feature, causing it to print
automatically each time the printer is restarted. See “Start-up Page”
in chapter 6 for details.

Sysparm.ps prints a list of current system parameters.

XANTÉ Command Center

XANTÉ Command Center allows you to check and control many
printer functions from your PC. See “XANTÉ Utilities Installer”
earlier in this chapter for installation instructions.

File and Help menus are similar to other Windows applications and
are not described in this section.

Note:

Your PC must be directly connected to the printer through a
bidirectional parallel or straight-through serial cable to use
XANTÉ Command Center.

Options Menu

This menu allows you to change XANTÉ Command Center screen
colors.

Controller Menu

This menu allows you to perform page and line length calibrations,
get printer settings and status information, download PostScript files
to the printer, set network parameters, and change some printer
default settings (fig. 4.17).

Summary of Contents for ScreenWriter 3

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands