Xante ScreenWriter 3, Manual

Page: 112 / 288

4-26 PC Setup bb __________________________________________
Ftp.ps prints instructions for uploading and downloading files to
XANTÉ’s FTP (File Transfer Protocol) site.
InitdskX.ps files are used to initialize hard disks attached to or
installed in your printer.
• Numbered files initialize the SCSI disk with the same device
number (Initdsk1.ps initializes SCSI disk #1, Initdsk2.ps
initializes SCSI disk #2, etc.) on the printer.
• Initdska.ps and Initdskb.ps initialize the internal IDE drive of the
same designation (the A or B disk) on the printer.
• Initdsks.ps initializes all SCSI and IDE drives attached to the
printer.
A hard disk must be initialized before it can be used to store
downloaded fonts or to set up a spooling queue. Initializing a disk
erases all information stored on the disk.
Novell34.ps prints instructions for setting up a XANTÉ printer on a
Novell network.
Parmdump.ps prints a list of current settings for the communication
devices configured for your printer.
Set_ip.ps allows you to set your printer’s IP address. Open the file in
a text editor and change the IP address in parentheses to your
printer’s IP address. Save the file, and download it to your printer.
The printer must be restarted before the change is effective.
Setzone.ps allows you to set your printer’s EtherTalk zone name.
Open the file in a text editor and change “name of zone” in the
parentheses to the name of your EtherTalk zone. Save the file, and
download it to your printer. The printer must be restarted before the
change is effective.
Startpg.off disables the printer’s start-up page feature, preventing it
from printing automatically each time the printer is restarted. See
“Start-up Page” in chapter 6 for details.