Xante ScreenWriter 3, Manual

Page: 120 / 288

4-34 PC Setup bb __________________________________________
2. Choose Configure: Spool Device. The Select Spool Device
window appears (fig. 4.22).
Fig. 4.22 Select Spool Device Window
3. Select the disk to store the spooled jobs (or select NONE to
disable spooling); then click OK. The Spooler window
reappears (fig. 4.19).
4. Choose Configure: I/O Interfaces to Spool; the Select I/O
Interfaces to Spool window appears (fig. 4.23).
Fig. 4.23 Select I/O Interfaces to Spool Window
5. Select the interface that you use to send files to the printer;
then click OK. The Spooler window reappears (fig. 4.21).
6. Click Close to exit the Spooler menu; then select File: Exit to
close XANTÉ Command Center.