Xante ScreenWriter 3, Manual

Page: 135 / 288

___________________________________________ PC Setup 4-49
7. Copy the recorded measurements in boxes A through F, I, and
J and the fixed values in boxes G and H from the calibration
page to the corresponding boxes in the Enter Calibration
Values section of the More X-ACT window.
8. Click Update Printer.
Note: When you click Update Printer, a window displays the
Printer Calibrated message. Click OK to continue and
all the numbers clear automatically from the boxes in
the Enter Calibration Values section. Do not enter the
values again. Also, if you click Reset Printer, you can
reset all settings or the selected media type.
9. Repeat steps 5 through 8 until the measurements in the
corresponding boxes are within .5 mm of each other.
Note: Your application printer properties must match your
calibration settings. For example, if you chose User-
defined 1 as your media type in the More X-ACT
calibration window for 11 x 17 (tabloid) paper, you
must choose User-defined 1 as your Media Weight in
your application printer properties when printing on 11
x 17 paper.
10. Click Close. The More X-ACT window closes.
Printer Margin Adjustment
Use the Printer Margin Adjustment feature to adjust the printer
margin, which is the position of the imageable area on the media.
Note: Use the standard paper size (letter or A4) for your paper
cassette with the Align Paper function.
1. Open XANTÉ Command Center and select Controller: Align
Paper. The Align Paper window appears.