Xante ScreenWriter 3, Manual

Page: 103 / 288

___________________________________________ PC Setup 4-17
7. Select the drive containing the CD-ROM (fig. 4.10); then,
select the PPDs: Level3: win95_98 folder (for a printer that
supports Adobe PostScript 3) or select the PPDs: Level2:
Win95_98 folder (for a printer that supports Adobe PostScript
Level 2).
Note: Windows NT 4.X uses the Windows 95 and 98 PPD.
8. Select your printer from the list of printers and click Next (fig.
4.10). Go to step 9 for a local printer (or systems running
Windows NT 4.0); go to step 10 for a networked printer.
Note: You can only select one PPD per installation. To
install a PPD in addition to the standard PPD, click
Add Another in step 14.
9. Select the port through which your PC is connected to the printer
from the Available Ports box in the Local Port Selection window
(fig. 4.11); then for Windows 95 and 98 click Next and go to step
11. For Windows NT 4.0, select LPT1; then, click Next and go to
step 10. (The actual port configuration is done in “Configuring
the PPD for Windows 95, 98, or NT 4.X,” later in this chapter.)
Note: Click Configure Port to change port configuration.
Fig. 4.11 Local Port Selection Window
10. Select Not Shared in the Get Shared Information window.
Click Next. This window only appears on systems running
Windows NT 4.0.