manualshive.com logo in svg

Xante ScreenWriter 3, Manual

Share
Download
Xante ScreenWriter 3 Manual Download Page 43

_____________________________________

 Macintosh Setup  3-7

           

Fig. 3.2  AdobePS Installer Window

8.

Change the destination disk (if necessary) for the driver in the
Install Location box; then, click Install and follow instructions.
A message window appears when installation is complete.

9.

Click Restart. After the restart, finish setup by following
procedures in “Configuring the PPD” and “Configuring the
Printer” later in this chapter.

Adobe PostScript Printer Drivers

The XANTÉ CD-ROM contains the Adobe PSPrinter driver and
printer PPDs. Before using your printer, install and configure your
printer’s Adobe PostScript printer driver and PPD.

Selecting the Adobe PostScript Printer Driver

Select the driver that best fits your needs and system configuration
(AdobePS 8.6, AdobePS 8.5.1, or Adobe PSPrinter 8.3.1). If the
chosen driver is not compatible with your system, try one of the
other two drivers.

Summary of Contents for ScreenWriter 3

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands