Specialized Concentrated Focused
Machine Control Bar
「
11
」
Fig. 3-4 Operation interface of process control
[Plasm]
After the
button is clicked, the system will send an arc striking signal which will be opened
automatically when machining starts. After striking, normal machining can be started.
[Auto-H.]
After
is clicked, the system will open auto height gauge and adjust the distance between cutter
head and the part.
[Fall]
After
is clicked, the system will send a signal of falling and the cutter will descend automatically.
Clicking it again stops it from falling.
[Rise]
After
is clicked, the system will send a signal of rising and the cutter will lift up automatically.
Clicking it again stops it from rising.
