Specialized Concentrated Focused
Machine Control Bar
「
7
」
Double clicking
―WorkCoor‖ (―MachCoor‖) will shift to display current machine coordinates (workpiece
coordinates), so will clicking on pull-down arrow on the right side of
―WorkCoor‖ (―MachCoor‖).
3.2. Manual Settings Area
The operation interface of manual settings is as shown below:
Fig. 3-2 Manual settings interface
[Feedrate Override]
As
, feed rate is controlled by adjusting current feedrate override.
The formula is:
value
feed
Rated
override
feedrate
Current
rate
feed
Current
The least unit of feedrate override scale is 1%. Current feedrate override is displayed beneath
―F‖.
Three ways can be used to revise the feedrate override: click on the sliding axle; drag the slide block;
click the slide block to choose it, then press [PageUp], [PageDown] key; when [PageUp] or
[PageDown] key is pressed once, the feedrate override decreases (or increases) by 20%. The range
of feedrate override is 0% ~ 120%.
[Manual Operation]
As
and
, they are manual buttons of X axis, corresponding to negative and positive
motion direction of X axis, with shortcut keys as 4 and 6 on the keyboard; as
and