Specialized Concentrated Focused
「
24
」
Menu Functions
[Dot]
Select the option [Dot] under [Draw] menu or click the button
on the drawing toolbar, and then
click the left mouse button in a selected place of [Object Editor Space] to draw a point.
If the user needs to position the drawn point more precisely, he can input the coordinates
in
on the toolbar, and then press [Enter].
[Line]
If the user wants to draw a straight line, he can select the option [Line] under [Draw] or single click icon
.
Two points can determine one straight line. Draw two points in [Object Editor Space] as the beginning
and end points of a straight line.
After selecting a line, the user can input the beginning and end points coordinates in the dialog as
following to position and redraw it accurately.
[Arc]
If the user wants to draw an arc, he can select [Arc] under [Draw] or single click icon
.
NcEditor ensures the position and size of an arc by radius, arc center, beginning angle and central
angle.
After selecting an arc, the user can accurately position and redraw it by inputting its circle center
coordinates, required radius, beginning angle and central angle in the following dialog.
CAUTION
1 rad. = 180/π degree
[Polyline]
A polyline refers to a curve connected end to end by different straight lines and arcs, which enables the
user to reduce operation times of segments and improve the velocity of modeling via finishing
manipulation of multiple arcs and segments once.
If the user wants to draw a polyline, he can select [Polyline] under [Draw] or single click icon
.
During drawing, the user can right click to select the type of a polyline, i.e. line or tangent arc. After
drawing finishes, right click to select the type to finish drawing, as following:
