Specialized Concentrated Focused
「
72
」
Machine Tool Debugging
5.8.4. Multi-cutting of Round Tube
Our software supports cutting multiple objects on a round tube, with the concrete methods as
following:
1) Draw or import the objects to be cut, as shown in Fig. 5-17.
Fig. 5-17 Draw objects of pipe multi-cutting
2) Select all the objects and then select
―Set Intersecting Line‖ under ―Object‖ menu or under
right-click menu. (Setting
―Intersecting Line‖ for each object is also ok, but too tedious.) A dialog as
following pops up.
Fig. 5-18 Setting intersecting line
In the above picture:
Rev Axis: consistent with current rotary table configuration.
Pipe Dia.: the diameter of current pipe, which must be larger than the max. height of all objects, or
an error prompt will pop up.
Precision: the contact ratio of actual cutting path and pre-estimated path; the smaller the Precision
is, the smaller the error will be.
