Specialized Concentrated Focused
「
10
」
Machine Control Bar
CAUTION
The software saves the machining info every 5s. If power failure occurs before
the software saves the machining info, after re-powered, the software will return
to the last saved position after this function is used, i.e. the machine tool will
retract a little distance before continuing machining.
If this function is used not after power failure in machining, machining will be
continued from the exact breakpoint.
[Simu]
As
, if a program is loaded and the system is in
―Idle‖ state, clicking this button will make the
system start rapid simulation from the first line of program automatically.
Under simulation mode, the system will not drive the machine tool to do the relative machinery and
electric actions, but only show the machining path at a rapid speed in the [Object Editor Space].
[DryRun]
As
, in dry run mode, except for not cutting the workpiece, the machine tool will start working as
in actual machining under the running of a machining program.
[Go Forward & Backward (F4, F3)]
As
, this button is used for forward motion or reverse motion during machining.
If the user wants to go back to a previous machining position, selecting
―Go Backward‖, i.e. the left
arrow, will make the system reverse along the original path.
The user can set the distance of forward motion or reverse motion according to his own needs. After
setting, clicking
―Go Forward‖ or ―Go Backward‖ will move the corresponding distance.
After the cursor is moved onto this button, a little double-arrow will appear. Clicking on this
double-arrow can change to
―Jog‖ or ―Specify Distance‖. If ―Jog‖ is switched to, clicking on ―Go
Forward
‖ (―Go Backward‖) and holding down the mouse will make the plasma head keep forwarding
(reversing) till the mouse is loosed. If
―Specify Distance‖ is switched to, forward (reverse) distance can
be user-defined by clicking on the original distance and entering a new distance. After the distance is
changed, each time clicking on
―Go Forward‖ or ―Go Backward‖ will make the plasma head forward
(reverse) the set distance.
3.4. Process Control Area
The operation interface of process control is as shown in Fig. 3-4.
