Specialized Concentrated Focused
「
68
」
Machine Tool Debugging
5.8.1. Circle Cutting
The dialog of circle cutting is as shown in Fig. 5-10.
Fig. 5-10 Intersectional cutting of primary pipe-circle cutting
Rev Axis: under rotary table configuration, rotary axis is fixed.
Circle cutting parameters are as follows:
Primary Dia.: the diameter of primary pipe, like
―D‖ in the above picture. Under rotary table
configuration, its value can be changed by clicking
behind, synchronizing with the system
parameter
―Rotation Diameter‖.
Auxiliary Dia.: the diameter of auxiliary pipe, like
―d‖ in the above picture. Manually enter the
auxiliary diameter which must be less than or equal to primary diameter, when cutting the primary
pipe.
Distance: the offset between central line of primary pipe and central line of auxiliary pipe, like
―e‖
in the above picture.
2
Dia.
Auxiliary
Dia.
Primary
Distance
Angle: the tilt angle ([5, 175]) between intersected primary pipe and auxiliary pipe, like
―A‖ in the
above picture.
After entering the above parameters and clicking
―Create Curve‖, the motion trajectory of cutting
primary pipe will be generated automatically according to the data, as shown in Fig. 5-11.