National Ramp New Vertical Pickets Quick Installation Guide
Thank you for purchasing from National Ramp! This quick installation guide will focus on the differences
between a vertical picket handrail vs. dual rail handrail (Liberty/Breeze) install. It is a prerequisite to
understand how to install dual rail handrails on the Liberty or Breeze system before proceeding with this
guide. Please read through entire guide before installation.
Tools Required:
Tools required to install Liberty / Breeze system
9/16” open end wrench (will be used for inside corner configurations)
7/16” socket and/or wrench (used for vertical picket handrail through-bolts)
Vertical Picket – Legs:
What’s different?
Dual Rail Handrail (Liberty/Breeze)
New Vertical Picket Handrail
Legs are fixed sizes and once piece.
Leg channel and
foot plate are one piece.
Vertical picket legs can be cut and customized.
Leg
channel and foot plate are 2 separate components.
Leg channel can be cut and installed into foot plate.
The length is customizable due to potential
interference with bottom rail of the vertical picket
handrails.
Instructions:
1.
Determine required leg sizes and cut leg
channels to required lengths. Top of leg should
extend 3” from walking surface (2-3” for
platforms, 3-4” for ramps sections).
(ramp) (platform)
