Specialized Concentrated Focused
Appendix
「
127
」
Parameter Name
Setting Range
Default
When
Enabled
YAxis Param
Rotation diameter
1~3000 (mm)
10
After restart
Axis direction
1: Positive; -1: Negative
1
After restart
Pulse equivalent
0.00000001 ~ 1000(deg/p)
0.01
After restart
Check worktable stroke
Yes: Enable; No: Disable
Yes
After restart
Lower limit of worktable stroke
-999999 ~ Upper limit(mm)
-1000
After restart
Upper limit of worktable stroke
Lower limit ~ 999999(mm)
1000
After restart
Starting speed
0 ~ Max. speed(mm/min)
0
After restart
Max. speed
0 ~ Max. speed supported by
hardware(mm/min)
7853.98163
4
Immediately
Max. acceleration
0 ~ 100000(mm/s
2
)
400
After restart
Max. jerk
0 ~ 100000( mm/s
3
)
10000
Immediately
ZAxis Param
Axis direction
1: Positive; -1: Negative
1
After restart
Pulse equivalent
0.00000001 ~ 1000(mm/p)
0.001
After restart
Check worktable stroke
Yes: Enable; No: Disable
Yes
After restart
Lower limit of worktable stroke
-999999 ~ Upper limit(mm)
-1000
After restart
Upper limit of worktable stroke
Lower limit ~ 999999(mm)
1000
After restart
Starting speed
0 ~ Max. speed(mm/min)
0
After restart
Max. speed
0 ~ Max. speed supported by
hardware(mm/min)
9000
Immediately
Max. acceleration
0 ~ 100000(mm/s
2
)
400
After restart
Max. jerk
0 ~ 100000 (mm/s
3
)
10000
Immediately
Compensation
Lead screw compensation mode
0: No compensation;
1: Backlash compensation;
2: Screw error compensation
0
After restart
Backlash X
0 ~ 0.1
0
After restart
Backlash Y
0 ~ 0.1
0
After restart
Backlash Z
0 ~ 0.1
0
After restart
Track Control
Max. look-ahead paths
1 ~ 1000
300
Immediately
Track smooth time
0 ~ 0.064(s)
0
Immediately
―Track smooth time‖ works as post-acceleration/ deceleration. The larger the value is, the more
ambiguous the details of workpiece are, i.e. the workpiece is smoother. But it will lead to reduction
of arc radius in machining an arc. And it will also dwarf wave peak in machining workpiece
resembling waves, as following.
Fig. 7-6 Track smooth
