Specialized Concentrated Focused
Machine Control Bar
「
9
」
Fig. 3-3 The interface to run a program
[Start (F(9)]
As
, if there is no loaded processing file, the button is disabled; if a processing file is loaded, the
button is enabled. After the button is clicked, the system will start machining automatically from the first
line of the loaded processing file.
The button has two functions:
If a certain processing procedure has been loaded, homing has been finished, and the system is in
"Idle" state, by pressing the button, the machine tool will carry out the procedure automatically from
the first line. Once machining starts, the system enters into
―Running‖ state.
If the system is under ―Auto|Pausing" state, by clicking the button, the system will resume
machining from the suspended position automatically and enter into
―Running" state.
[Pause (F10)]
As
, after this
―Pause‖ button is clicked, the machine tool will suspend machining and lift its gun,
and then enter into pausing state. So as to continue machining, press [Start] button or select the
relative menu item.
[Stop (F11)]
As
, this button is valid during machining. Clicking this button will make the machine tool stop
working and enter into idle state. This is the normal way to stop machining during machining process.
[Resume]
As
, after this button is clicked, the system will resume machining from the last stop position
automatically.
In case of E-stop, power failure, or clicking
―Stop‖ button during machining, the user can press this
button to make the machine tool rapidly resume machining from breakpoint if the accuracy of
workpiece coordinate is ensured. If the accuracy of workpiece coordinate can not be ensured, the user
needs to home all axes before clicking this button to resume machining.