Specialized Concentrated Focused
Machine Tool Debugging
「
69
」
Fig. 5-11 Trajectory of cutting primary pipe
―Cutting Pos‖ can be used to cut multiple circular holes or rectangular holes on a round tube by
clicking
―Create Curve‖. Under ―YRevB‖ configuration, value of Y refers to the angle Y axis rotates in
rapid traverse with respect to the first cut hole, while value of X means the length X axis moves (i.e. to
the next cut position) in rapid traverse with respect to the first cut hole. The trajectory of cutting several
circular holes is as shown below.
Fig. 5-12 The trajectory to cut several circular holes on a primary tube
5.8.2. Rect Cutting
Rect (rectangle) cutting is similar to circle cutting, except for some different parameters, as shown in
