Specialized Concentrated Focused
「
II
」
Preface
Precautions
Precautions can be divided into caution and warning according to the degree of possible loss or injury
in case of negligence or omission of precautions stipulated in this manual.
CAUTION
: general info, mainly for informing, such as supplementary instructions and
conditions to enable a function. In case of negligence or omission of this kind of precautions, you may
not activate a function. Note that in some circumstances, negligence or omission of this kind of
precautions could cause physical injury or machine damage.
WARNING
: warning info requiring special attention. In case of negligence or omission of
this kind of precautions, you may suffer physical injury, or even death, machine damage or other
losses.
WARNING
1) Precautions Related to Storage and Transportation
The products should be transported properly in terms of the weight;
An excess of specified quantity of stacking products is prohibited;
Climbing, standing or placing heavy loads on the products is prohibited;
Dragging or carrying the products via cables or devices connected to them is prohibited;
2) Precautions Related to Installation
Only when this equipment installed in the qualified electricity cabinet can it be used. The
construction of the cabinet must reach IP54 grade of protection;
Paste sealing strips on the joint of the cabinet to seal all the cracks;
Cable entry should be sealed while easy-to-open on the spot;
A fan or heat exchanger should be adopted for the heat dissipation and air convection of the
cabinet;
If a fan is adopted, air strainer is a must in air inlet or air outlet;
Dust or cutting fluids may have access to the CNC device via the tiny cracks and tuyere.
Therefore it is necessary to pay attention to the surroundings and air flow direction of the air
vent to make sure that the outflow gas is towards pollution source;