TAD TAD-E1 Unpacking Instructions Download

Page: 1 / 2

2. Remove the sides of the packing container.

Outer carton

3. Remove the tape (six pieces in total) from the inner carton, and remove

the inner carton.

• After removing the inner box and top protection piece, remove the plastic bag and protective sheet covering the speaker.

Inner carton

Top protector

Plastic bag

Bottom protector

Bottom lid

TAD Evolution One

TAD-E1 SPEAKER SYSTEM

Unpacking instructions

This speaker system is extremely heavy (54 kg, or 119 lbs). Be sure
to carry out unpacking and installation with at least two people.

Trying to handle too much weight can throw you off balance, causing you to fall or otherwise

incur bodily injury.

Read before removing your speakers from their packaging.

1. Cut the two packing straps on the outer carton, remove the “handle”-

shaped packing joints (seven places), and cut open the top flap.

• To remove the packing joints, hold to the lever and pull outward.

Straps

Packing joints

Top flap

Tape

Lever

Summary of Contents for TAD-E1

Page 1: ...king instructions This speaker system is extremely heavy 54 kg or 119 lbs Be sure to carry out unpacking and installation with at least two people Trying to handle too much weight can throw you off ba...

Page 2: ...rs Use at least two people to remove the speaker from its bottom protector Avoid dragging the speaker along its bottom side as doing so can cause damage to the speakers TECHNICAL AUDIO DEVICES LABORAT...